13
- Push 2 gimbal your transmitter UP– RIGHT, channel ROLL, PITCH, YAW, THROTTLE on interface of
Betaflight go to Min = ~ 2000.
Your aircraft will can’t take off if value of channel Roll, Pitch, Yaw, Throttle don’t go from ~1000 to
~2000.
You can change this value by configure channel ENDPOINT/RANGE on your Transmitter
The AUX channels depending on configuration you Transmitter. We need minimum 6 channel to
Moskito can take off. We recommend you use 7 channels for Moskito:
-
Roll channel
-
Pitch channel
-
Throttle channel
-
Yaw channel
-
ARM channel - ARM enable, your aircraft can fly and contra. You should choose 2 state
-
Flight Mode - switch and select between flight models: Angle, Horizon, Arco.
-
Beeper channel – Look at your Moskito when lost it.
Step 4
: Go to
Mode
tab, click
Add Range
and select AUX channel. At AUX list, you choose AUX number
corresponding Switch on TX use for:
ARM : when ARM enable, your aircraft can fly and contra. You should choose 2 state.
Flight mode: You should choose 3 state for mode ANGLE, HORIZON, ACRO.
We will set up 3 flight mode ANGLE, HORIZON, ACRO corresponding 3 level Beginner, Amateur,
Advanced and ARM function and Beeper like below pictures:
