![background image](http://html1.mh-extra.com/html/furious-fpv/kombini-dshot/kombini-dshot_user-manual_2347001021.webp)
20
Basic setup
Please, follow carefully these next steps, and always
remove
your propellers when you’re
configuring your quad
STEP 1:
Connect
Kombini DS with the computer via
USB
cable and then
open
BetaFlight
STEP 2:
Configure
Ports.
(1)
Turn on
MSP
of
UART 1
to use OSD.
(2)
Turn on
Serial Rx
of
UART 3
to use
Receiver Mode
(3)
Select
SmartPort
of
UART 2
to use
S.Port
of
Receiver
.
* Note:
Please make sure that all the connections are correct.
STEP 3:
Go to
Configuration
tab and choose
ESC/Motor
protocol in
ESC/Motor Features
STEP 4:
Select
Serial- based receiver
in
Receiver Mode
Summary of Contents for KOMBINI DSHOT
