4
SECTION 1: SCOREBOARD SETUP
1.
If you are using the scoreboard without an AC adapter, open the two battery covers located on the
back-side of the scoreboard and install 8 C-size alkaline batteries (not included). Close the battery
covers.
2.
Charge the wireless keypad as described in
Section 3.
3.
Extend the rear support legs located on the back
side of the scoreboard as shown and place the
scoreboard on a stable surface (floor, table, etc).
4.
Use the optional AC adapter if operating the
scoreboard near an electrical outlet to conserve
batteries.
NOTE: If you are using the scoreboard outdoors, aim the display away from the sun for best
visibility.
5.
Place the scoreboard in a desired location near your playing field. The best location is mid-court on the
sidelines. This will provide the best view of the display. It can also be placed in the corner of the
playing field, as long as everyone in the opposite corner of the field can view it and is within radio range
of the keypad.
6. Select the desired display brightness by pressing and holding the Away
button for
approximately 3 seconds. Each press and hold of this button will toggle between the low, mid, and
high brightness levels.
7.
Test the operation of your scoreboard to verify performance over the distance between the keypad and
scoreboard prior to the start of your game. Move the scoreboard closer to the keypad if it does not
respond as expected.
8.
You are now ready to use your scoreboard. Proceed to Section 2 for instructions on using your
scoreboard in your game.
