Connect the Blower
Inflation
Step
#3
Step
#4
1 Position the blower
This inflatable requires one
blower. Position the blower
so that the inflation tube is
straight and at a 90° angle
to the inflatable allowing for
ease of airflow.
DO NOT SWITCH
POWER ON YET
Test the blower GFCI Adapter
1. Plug GFCI into receptacle.
2. Press reset button.
3. Press test button.
4. Press reset button to use the blower.
5. Do not use if the button fails to disable blower.
Reset
Button
Test
Button
CAUTION
Read the blower’s
manual completely
before using.
4
1
2
Switch the blower’s
power on.
It may take
anywhere from 5 to 10
minutes to fully inflate.
If blower does not
operate when switched
ON, press the reset
button on the GFCI
adapter.
Blower should remain
on
and continuously
inflate the bouncer during
use. Airflow through
seams is normal.
WARNING:
DO NOT USE THE BLOWER if the power remains ON when
the test button is pushed. If unit is NOT working properly, take the blower
to a certified electrician immediately.
CAUTION:
DO NOT allow children to play
in the inflatable until it is fully inflated and
anchored to the ground.
90°
2
3
Attach inflation tube
Secure inflation tube
Attach
inflation tube
to
blower unit making sure
the tube is not twisted.
Use the hook and loop
fastener to tightly secure
inflation tube to the end of the
blower.
7
