Control cables of the camera
The two control cables of the camera are also accessible via the 12-pin Weidmüller plug on the rear of the FAC
9400 IP. The capacity of the outlets is max. 50 mA per output.
Signal
Weidmüller connection strip pin
Signal
Weidmüller connection strip
pin
ST1
1
ST2
11
GND to ST1
2
GND to ST2
12
Control inputs:
Connection for easy remote
control, inputs internally via
pull-up resistors 22 k
Ω
to +5 V,
activation against Low (video
mass)
Control outputs:
More than 100
Ω
series
resistance is switched to
ground, Imax=50 mA
Surge protection:
Limiting of static stresses via
diodes at app. < -1 V and >
+6 V
25
FAC 9400
01/2013