General description
FAC 9400 IP is an IP camera with up to two different resolutions and a digital signal processor (DSP), a video,
audio and I/O connection that provides powerful support for video surveillance systems via LAN or Internet.
The Advanced Simple Profile MPEG-4 coding offers – compared to other previously used standards –
considerably better image quality with dynamic image sequences at the same network load. This is a very
important advantage for transmission and recording.
The camera can be configured with the Funkwerk management system p.o.s.a. or LAN-PGE. The FAC9400
encoder parameters can be changed separately via web browser HTML. In case of alarms, MPEG-4 sequences
can be recorded on the local memory to be configurable in length (even previous history), image rate and image
quality. The alarm triggering event will also be forwarded to a central management system. Live images and
stored sequences will be transmitted to the control center via LAN.
Depending on the network strategy of the customer, all existing nets with "advanced" and/or "standard" MPEG 4
profile can be used at full resolution – from broadband LAN on to ISDN up to GSM. The solution used allows the
customer to also choose a freely scalable minimum image quality with variable image rates to minimize the
network load. Power can be supplied either via PoE or with an external PSU with 12V DC to 29V DC. The jack
plug for the external power supply can be locked.
Note:
This operating manual is to be used only for the connection of the FAC 9400 IP and the first steps of
commissioning. Refer to the technical documentation 43524920.00 (encoder only) for VNS components and the
description of the respective FAC940 for details, special settings and function instructions.
Maintenance
Electrical security (power supply) must be analysed regularly. The power supply must always be cut off for
maintenance works. Use only solvent-free cleaning agents without pressure.
Help with faults
No function (LEDs all off)
Check supply voltage
No image
Check all connections as well as the entire configuration
Other malfunctions
See technical documentation of the VNS
Please notify the authorized service staff of further malfunctions. The conclusion of a maintenance contract will
make replacement devices available at the plant at short notice.
Funkwerk video systeme GmbH
Reparatureingang DE
Thomas-Mann-Str.50
D-90471 Nürnberg
Tel. 01805 671205
Fax 0911/75884-100
E-Mail:
www.funkwerk-vs.com
FAC 9400
01/2013
20