Frame Relay
bintec User’s Guide
19
Multiprotocol over Frame Relay Submenu
4
Transit network
You use an additional ISDN IP address each for your gateway
and the connec-
tion partner. This sets up a virtual IP network – called a transit network – during
the connection. You do not normally need this setting, but it is necessary for
some special configurations.
The menu consists of the following fields:
Field
Description
IP Transit Network
Defines whether your gateway uses a transit
network to the connection partner. Possible val-
ues:
■
yes
: The transit network is used.
■
no
(default value): The transit network is not
used.
■
dynamic client
: Your gateway receives an
IP address dynamically.
■
dynamic server
: Your gateway assigns IP
addresses to the remote gateway dynami-
cally.
Local IP Address
Only for
IP T
RANSIT
N
ETWORK
=
yes, no
.
■
if
yes
= WAN IP address of your gateway
■
if
no
= LAN IP address of your gateway.
Partner IP Address
Only if
yes
is set for
IP T
RANSIT
N
ETWORK
.
Connection partner’s WAN IP address in the
transit network.
