-7-
Getting Started
Bluetooth Adapter
Completing the hands-free car kit
Connecting the Bluetooth adapter to the system connector
All telephone holders designed for use with the
handsfree set can be easily connected and then dis-
connected via the system connector.
Remove the system connector from the bracket by
gripping the release knob located in the recess. Pull
the knob out until the connector's locking springs
disengage and the casing detaches with the release
knob. The connector can now be moved freely along
with the lead.
Insert the system connector into the Blue-
tooth adapter by pulling back the release
knob and then pushing the connector into
the appropriately shaped recess on the
back of the Bluetooth adapter. Then let go
of the release knob.
The locking springs snap into place. The
upper side of the connector should then lie
level with the back of the adapter.
If you want to change or remove the Blue-
tooth adapter, detach the connector in the
same way as you would detach it from the
bracket
Protection of the system plug
In order to protect the sensitive contacts of the system plug from
dirt or damage if you remove the Bluetooth Adapter , you should
snap the system plug into position on the mounting bracket.
Additionally, this keeps the system plug in a defined parking
position, which makes it available when it is needed.
