7
Wiring and Connections
The Resolution 1 Loudspeaker utilizes two
Speakon NL4 Connections; an Input and a
Link. The Resolution 1 follows the
standard wiring configuration as shown in
left hand-side diagram.
When using the Passive Module the connection configuration should be
done accordingly to the diagram show below. In this configuration the
full range signal is connected via channel 1 on the NL4 to the Module,
while channel 2 is not connected.
WARNING: The passive module is only designed to drive an
individual Resolution One and thus the Link port MUST NOT BE
USED. When not using the passive module insure it is completely
isolated from the signal path.
Summary of Contents for Resolution 1
Page 10: ...9 Horizontal Polar Response ...
Page 11: ...10 Vertical Polar Response ...
