24
TYPICAL PROPERTIES BALANCING AMPLIFIER SSIM-04Mc
__________________________________________________________________________________________________
The following typical measurement results were measured on a SAM-1C series unit equipped with SSIM-04Mc module. Usual load
resistance of 10 kΩ at line levels of +6 dBu and 0.0 dB gain, unless otherwise stated. The configuration of the analyzer is indicated in the left
block. Feed via XLR socket, measured at the RCA output. Analyzer: R&S UPL
Frequency response 2 Hz...20 kHz Scale: ± 1 dB
Phase response 20 Hz...20 kHz Scale: ± 30°
Frequency response 10 Hz...110 kHz Scale: ± 1 dB
Common mode rejection ratio balanced input
THD+N at 1 kHz Measuring bandwidth 20 Hz...20 kHz
THD at 1 kHz Harmonics measured from k
2
...k
9
RMS Noise-
Spectrum at output with amplification 0,0 dB
Crosstalk left channel
⇔
right channel