22
TYPICAL PROPERTIES BALANCING AMPLIFIER SSOM-04Mc
___________________________________________________________________________________________________
The following typical measurement results were measured on a SAM-1C series unit equipped with SSOM-04Mc module. Usual load
resistance of 10 kΩ at line levels of +6 dBu and 0.0 dB gain, unless otherwise specified. The configuration of the analyzer is indicated in the
left block in each case. Feed via cinch socket, measured at the XLR output. Analyzer : R&S UPL
Frequency response 10 Hz...110 kHz, Scale +/- 1 dB
Phase response 10 Hz...20 kHz, Scale +/- 30°
Symmetry of the output voltage at Ua +12 dBu R
L
= 10k
Ω
Symmetry of the output impedance at Ua +10 dBu R
L
= 600
Ω
THD+N at 1 kHz Measuring bandwidth 22 Hz...22 kHz
THD at 1 kHz Harmonics measured from K
2
...K
9
RMS-Noise-
Spectrum at output with amplification 0,0 dB
Crosstalk left channel < > right channel