Funk Software Proxy, User Manual

Page: 54 / 63

The Proxy Host 57
PHOST Command Line Switches
PHOST will recognize switches on its command line as follows:
PHOST /U
unload PHOST
PHOST /C run the Host Control Panel
PHOST /B
forces a reboot when disconnected
PHOST /D
disables the keyboard and mouse on the host
PHOST /S blanks the screen on the host
Running the DOS Control Panel
To run the Control Panel from DOS, run PHOST with the /C switch:
PHOST /C
↵ ↵
Note: Some Proxy Host Settings are only applicable in Windows and are not
available from the DOS Host Control Panel.
Operating the Control Panel is easy. These are the basic operations:
Š
To issue a command, press the appropriate function key.
Š
To move to any setting use the up/down arrows or click the setting with
the mouse. The setting you select will be highlighted and may be edited.
Figure 5-8: The Host Control Panel (DOS)