81
EN
EN
Recording
Playback
Editing
Introduction
Connections
Basic Setup
Function Setup
VCR Functions
Others
Español
VCR FUNCTIONS
Playback
Recording
Press [VCR] first.
1) Insert a prerecorded tape (refer to page 24 on “How
to Insert a Disc / Cassette Tape”).
2) Press [
B
] to start playback.
3) Press [
C
] to stop playback.
Note
• When a cassette tape without erase-protection tab is
inserted, the unit will start playback automatically.
• Tracking will be automatically adjusted upon
playback. To adjust the tracking manually, press
[TRACKING
K
/
L
]
on the remote control.
• S-VHS cassette tape is not to be used on this unit.
• Playback will stop when you change the output mode.
Press [VCR] first.
1) Insert a recordable tape with an erase-protection
tab intact.
Accidental erasure prevention
To prevent accidental recording on a
recorded cassette tape, remove its erase-
protection tab. To record on it later, cover
the hole with cellophane tape.
erase-protection tab
2) Select the recording mode using [REC MODE].
• The desired recording mode is selected in SP
(standard play) or SLP (super long play) mode by
pressing
[REC MODE]
.
Recording mode:
Tape speed
Recording / playback time
Type of tape
T60
T120
T160
SP mode
1hour
2hours
2-2/3hours
SLP mode
3hours
6hours
8hours
3) Press [INPUT SELECT] to select the appropriate
external input position (L1/L2) to which your
external tuner is connected.
4) Press [REC] to start recording.
Press [
C
] to stop the recording.
To pause recording:
Press
[
F
]
.
To resume recording:
Press
[
F
]
or
[REC]
.
After the unit has been in pause mode for 5 minutes, it
will stop automatically to protect the tape and the
video head from damage.
• Refer to pages 31-34 for instructions on “TIMER
RECORDING”.
To pause playback:
Press
[
F
]
.
Playback will pause and sound will be muted.
To resume playback:
Press
[
B
]
.
Information on VCR Functions
Caution on using S-video, component or HDMI connection for VCR:
• Only the playback audio / video are available with these connections.
• Under the condition listed below, the playback image cannot be viewed. Use the standard video connection, in such case;
- during DVD recording.
• HDMI video resolution cannot be changed when the unit is in VCR mode.
Note
• This function is available only when the unit is
connected by the VIDEO OUT jack.