68
EN
Setup
A
General Setting
A
Clock
1
Enter the date (day / month / year) using
[
K
\
L
].
Press
[
1
]
to move the cursor to the next field. If you
want to go back to the previous field, press
[
0
]
.
2
Enter the time (hours / minutes) using [
K
\
L
],
then press [ENTER
\
OK].
The clock will start.
• Although seconds are not displayed, they will be
counted from zero.
Note
• Your clock setting will be lost if either there is a power
failure or the unit is unplugged for more than 30
seconds.
• If “Auto Clock Setting” is set to “ON” when DVB channels
are memorised, you cannot select “Clock Setting”.
• The clock is not displayed in standby mode because the
unit will return to a new Power Saving mode (ECO) with
the display off.
This unit receives time signals from the analogue / DVB
channels, and set the clock automatically. Set the channel
tuning before setting Auto Clock.
1
Select “ON” using [
K
\
L
], then press
[ENTER
\
OK].
2
Press [SETUP] to exit.
3
Press [STANDBY-ON
Q
] to turn the unit off.
• The Auto clock function is activated.
• This unit will search for the time every time when the
power is turned off.
• Leave the unit off for about 10 seconds to give it time
to set the clock.
Note
• If you want to cancel “Auto Clock Setting”, select “OFF”
using
[
K
\
L
]
, and then press
[ENTER
\
OK]
at step
1
.
• If “Auto Clock Setting” is “OFF”, “Timer Recording
(EPG)” may not be able to perform.
• The clock may set itself automatically after you connect
the antenna cable to the unit and plug in the mains
cable. In this case, the current time will appear on the
front panel display.
• If there are only analogue channels memorised in this
unit:
- The channel assigned to “analogue / 1Ch” must
receive the PDC signal in order to set the clock
automatically.
- The unit will correct the current time by receiving PDC
broadcasts whenever the power is turned off.
- Between 23:00 and 1:00, the Auto Clock function will
not operate even when the power is turned off.
• The clock cannot be set automatically if you cannot
receive a channel in your area that carries a time signal.
In this case, set the clock manually.
• The unit will also correct the current time automatically
at 8:00 and 1:10 if the unit is in standby mode or if you
are watching DVB channel.
Setup
A
General Setting
A
DivX
Provides DivX
®
VOD registration code and deactivation
code.
Refer to page 45 for more details.
Set the DivX
®
subtitle.
Clock
A
Clock Setting
B
Auto Clock Setting (Default: ON)
A
B
Auto Clock Setting
Clock Setting
0 : 00
(TUE)
01 / 01 / 2013
Clock Setting
Auto Clock Setting
ON
OFF
DivX
®
A
DivX® VOD
B
DivX Subtitle (Default: OFF)
A
B
DivX® VOD
DivX Subtitle
OFF
English
Czech
Dutch
French
German
Hungarian
Italian
