FUNAI LT850-M32 - SERVICE, Service Manual, Page: 12 / 77

4-1 A0CF0DC_rev
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts and the CBA in order to gain access to
items to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
2. Disassembly Method
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
N = Nut, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
e.g. 2(S-2) = two Screws of (S-2),
2(L-2) = two Locking Tabs of (L-2)
(5) Refer to the following "Reference Notes in the
Table."
Step/
Loc.
No.
Part
Fig.
No.
Removal Note
[1]
Stand
Assembly
D1 4(S-1) ---
[2]
Rear
Cabinet
D1
13(S-2), 2(S-3),
3(S-4), (S-5)
---
[3]
Inverter
CBA D2
D5
6(S-6), CN1001,
CN1003, CN1050,
CN1100, CN1150,
CN1200, CN1900
---
[4]
Tuner
Shield
D2 2(S-7) ---
[5]
Power
Supply
CBA
D2
D5
6(S-8), CN101,
CN401, CN402,
CN403, CN404,
CN701 CN801,
CN802,
Jack Holder (HP)
---
[6] Jack Holder D2 2(S-9) ---
[7] Shield Box D2
3(S-10), 2(S-11),
5(S-12), 2(S-12A),
2(H-1), CN3901
---
TYPE A
[1] Stand
Assembly
[2] Rear Cabinet
[12] Speaker
[11] Speaker
Holder [L,R]
[3] Inverter CBA
[7] Shield Box
[4] Tuner Shield
[6] Jack Holder
[8] Digital Main
CBA Unit
[5] Power Supply
CBA
[16] LCD Module
Assembly
[17] Front
Cabinet
[14] IR Sensor
CBA
[10] AC Switch
Holder
[9] Power SW
CBA [13] Junction
CBA
[15] Function
CBA
[8]
Digital Main
CBA Unit D2
D5
--------------- ---
[9]
Power SW
CBA
D3 (S-13) ---
[10]
AC Switch
Holder
D3 2(S-14) ---
[11]
Speaker
Holder [L,R]
D4 4(S-15), Hook ---
[12] Speaker D4 --------------- ---
[13]
TYPE A
Junction
CBA D4
D5
Desolder ---
TYPE B
Junction CBA is not used.
[14]
IR Sensor
CBA D4
D5
2(S-16), CL103A ---
[15]
Function
CBA D4
D5
3(S-17) ---
[16]
LCD
Module
Assembly
D4 (S-18) ---
[17]
Front
Cabinet
D4 --------------- ---
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
Step/
Loc.
No.
Part
Fig.
No.
Removal Note