2-3
LTVP_ISP
Precautions during Servicing
A.
Parts identified by the
!
symbol are critical for
safety.
Replace only with part number specified.
B.
In addition to safety, other parts and assemblies
are specified for conformance with regulations
applying to spurious radiation. These must also be
replaced only with specified replacements.
Examples: RF converters, RF cables, noise
blocking capacitors, and noise blocking filters, etc.
C.
Use specified internal wiring. Note especially:
1) Wires covered with PVC tubing
2) Double insulated wires
3) High voltage leads
D.
Use specified insulating materials for hazardous
live parts. Note especially:
1) Insulation Tape
2) PVC tubing
3) Spacers
4) Insulators for transistors.
E.
When replacing AC primary side components
(transformers, power cord, etc.), wrap ends of
wires securely about the terminals before
soldering.
F.
Observe that the wires do not contact heat
producing parts (heat sinks, oxide metal film
resistors, fusible resistors, etc.)
G.
Check that replaced wires do not contact sharp
edged or pointed parts.
H.
When a power cord has been replaced, check that
5~6 kg of force in any direction will not loosen it.
I.
Also check areas surrounding repaired locations.
J.
Use care that foreign objects (screws, solder
droplets, etc.) do not remain inside the set.
K.
When connecting or disconnecting the internal
connectors, first, disconnect the AC plug from the
AC supply outlet.
L.
When installing parts or assembling the cabinet
parts, be sure to use the proper screws and
tighten certainly.
Summary of Contents for LT850-M32 - SERVICE
Page 13: ...4 2 A0CF0DC_rev 2 Rear Cabinet 1 Stand Assembly S 4 S 4 S 2 S 3 S 2 S 2 S 2 S 1 S 5 Fig D1...
Page 36: ...10 4 A0CF0SCP2 Power Supply 2 Schematic Diagram...
Page 37: ...10 5 A0CF0SCP3 Power Supply 3 Schematic Diagram...
Page 39: ...10 7 A0CF0SCF Function IR SENSOR Junction Schematic Diagram...
