background image

2

EN

PRECAUTIONS

POWER SUPPLY

The main power supply is engaged when the main plug is 
plugged in a 220-240 V

~

, 50 Hz AC outlet. To operate the 

unit, press 

[

Q

(standby-on)]

 to turn on the unit.

WARNING: LIVE PARTS INSIDE.                      

DO NOT REMOVE ANY SCREWS.

CAUTION

1)

Do not attempt to open the cabinet. There are no user 
serviceable parts inside. Refer all servicing to qualified 
service personnel.

2)

Slots and openings in the cabinet and the sides or 
bottom are provided for ventilation. To ensure reliable 
operation and to protect the unit from overheating, these 
openings must not be blocked or covered.                 
Avoid installation in enclosed spaces such as bookcases 
unless proper ventilation is provided.

3)

Keep the unit away from radiators and other heat 
sources.

4)

Do not push objects of any kind into the unit through 
the cabinet slots or openings as they could touch 
electrically live parts or short circuit parts resulting in a 
fire or electric shock.

5)

To prevent fire or shock hazard, do not expose this unit 
to dripping or splashing, no objects filled with liquids, 
such as vases, should be placed on the unit.

6)

Use the unit on a horizontal (flat) surface only.

7)

Do not place any combustible objects on the unit 
(candles, etc.).

8)

The LCD panel used in this product is made of glass. 
Therefore, it can break when the product is dropped or 
applied with impact. Be careful not to be injured by 
broken glass pieces in case the LCD panel breaks.       
The LCD panel is a very high technology product with 
921,600 thin film transistors, giving you fine picture 
details. Occasionally, a few non-active pixels may appear 
on the TV screen as a fixed point of blue, green or red. 
Please note that this does not affect the performance of 
your product.

9)

Disconnect the mains plug to switch off when the unit 
becomes faulty or not in use.

10)

The mains plug shall remain readily operable.

11)

Read the manual instructions to ensure correct and safe 
installation and interconnection of the unit in 
multimedia systems.

12)

Keep a distance of 20 cm around the ventilation 
openings of the unit.

13)

Batteries (battery pack or batteries installed) shall not be 
exposed to excessive heat such as sunshine, fire or the 
like.

WARNING:

TO REDUCE THE RISK OF FIRE OR 
ELECTRIC SHOCK, DO NOT EXPOSE THIS 
APPARATUS TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE COVER (OR 
BACK). NO USER SERVICEABLE PARTS 
INSIDE. REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with arrowhead symbol, 
within an equilateral triangle, is intended to 
alert the user to the presence of uninsulated 
“dangerous voltage” within the apparatus’s 
enclosure that may be of sufficient magnitude 
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral 
triangle is intended to alert the user to the 
presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the apparatus.

Do not place the unit on the furniture that is capable of 
being tilted by a child or an adult leaning, pulling, standing 
or climbing on it. A falling unit can cause serious injury or 
even death.

Summary of Contents for LT7-M19BB

































Reviews: