8-13
WF2
Q701
Emitter
WF5
Q752
Emitter
WF4
Q751
Emitter
WF6
Q753
Emitter
WF8
Q781
Emitter
WF7
Q754
Emitter
WF3
Q702
Emitter
Main CBA Bottom View
BL4100F01012-1
CAUTION !
For continued protection against fire hazard,
replace only with the same type fuse.
NOTE:
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.
Because a hot chassis ground is present in the power
supply circut, an isolation transformer must be used.
Also, in order to have the ability to increase the input
slowly, when troubleshooting this type power supply
circuit, a variable isolation transformer is required.
CAUTION !
Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.
If Main Fuse (F601) is blown , check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.
