4-4
L4202DC
[LCD-C2004]
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts and the CBA in order to gain access to
item(s) to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
2. Disassembly Method
(1): Order of steps in Procedure. When reassembling,
follow the steps in reverse order.These numbers
are also used as the Identification (location) No. of
parts in Figures.
(2): Parts to be removed or installed.
(3): Fig. No. showing Procedure of Part Location.
(4): Identification of part to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
S=Screw, P=Spring, L=Locking Tab, CN=Connec-
tor, *=Unhook, Unlock, Release, Unplug, or
Desolder
2(S-2) = two screws (S-2)
(5): Refer to the following Reference Notes in the
Table.
[3] Jack Shield
[5] Main CBA
[4] LCD Main CBA
[6] Inverter CBA
[1] Rear Cabinet
[8] Function CBA
[9] IR Sensor
CBA
[10] Speaker (s)
[2] Jack Holder
[7] LCD Module
Assembly
[11] Front
Cabinet
ID/
LOC.
No.
PART
REMOVAL
Fig.
No.
REMOVE/
*UNHOOK/UNLOCK/
RELEASE/UNPLUG/
DESOLDER
Note
[1]
Rear Cabinet
D1 11(S-1), 3(S-2)
---
[2]
Jack Holder
D2 2(S-3), (S-4)
---
[3]
Jack Shield
D2 ----------
---
[4]
LCD Main
CBA
D2
D3
3(S-5), *CN310A,
*CN311A, *CN313A,
*CN101B, *CN102B,
*CN103B
---
[5]
Main CBA
D2
D3
6(S-6), *CN801,
*CN802, *CN405,
*CN51, *CN53
---
[6]
Inverter CBA
D2
D3
6(S-7), *T1401,
*T1402, *T1403,
*T1404
---
[7]
LCD Module
Assembly
D2
D3
13(S-8)
---
[8]
Function CBA
D2
D3
3(S-9)
---
[9]
IR Sensor
CBA
D2
D3
2(S-10)
---
[10] Speaker (s)
D2
D3
4(S-11)
---
[11] Front Cabinet
D2 ---------------
---
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
