Recor
ding
Pla
ying discs
Editing
Bef
or
e y
ou star
t
Connections
Getting star
ted
Changing the SETUP men
u
VCR functions
Others
Español
F
rançais
Connection to an Audio System
Connections
15
• When you change the connections, all devices should be turned off.
• Refer to each owner’s manual for further information on other devices.
DVD/VCR
AUDIO OUT
L
R
L
R
DVD
AUDIO
OUT
or
Stereo system
DVD
DIGITAL
AUDIO OUT
COAXIAL
OPTICAL
COAXIAL
OPTICAL
AUDIO
Method 1
Analog audio
input jacks
Digital audio
input jacks
AUDIO OUT
DIGITAL
AUDIO OUT
Method 2
Audio Optical
Digital cable
(commercially
available)
Note
• If output is Dolby Digital encoded audio, connect
to a Dolby Digital decoder and set “Dolby Digital”
to “Stream” for the “Digital Out” setting in the
SETUP menu. (Refer to pages 94-95.)
• If output is DTS encoded audio, connect to a DTS
decoder and set “DTS” to “ON” for the “Digital Out”
setting in the SETUP menu. (Refer to pages 94-95.)
• The audio source on a disc in a Dolby Digital 5.1
channel surround format cannot be recorded as
digital sound by an MD or DAT deck.
• Unless connected to a Dolby Digital decoder or a DTS
decoder, set “Dolby Digital” to “PCM” and “DTS” to “OFF”
for the “Digital Out” setting in the SETUP menu. Playing a
DVD using incorrect settings may generate noise distortion
and may also damage the speakers. (Refer to pages 94-95.)
• Set “Dolby Digital” to “PCM” for the “Digital Out”
setting in the SETUP menu for connecting to an
MD deck or DAT deck. (Refer to pages 94-95.)
• By hooking this unit up to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality Dolby Digital 5.1
channel surround sound as heard in the movie theaters.
• By hooking this unit up to the DTS decoder, you can enjoy
5.1 channel surround system which reproduces the original
sound as truthfully as possible. 5.1 channel surround system
is developed by the Digital Theater System, Inc.
Dolby Digital decoder, DTS
decoder, MD deck or DAT deck
This unit
Audio Coaxial
Digital cable
(commercially
available)
Optical cable (not supplied)
• Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a
diameter of 15 cm or more when storing them.
• Use a cable which is 3 m or shorter.
• Insert cable plugs firmly into the connectors when making connections.
• If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a connector.
Audio cable
(supplied)
(usefull only in
DVD mode)
or
E9460UD(EN/ SP/FR)
.qx3 04.8.10 10:47 Page 15
