FUNAI F20LCTE, Service Manual

Page: 3 / 57

1-1 L0305SP
SPECIFICATIONS
<TUNER>
ANT. Input ------------------- 75ohm Unbal., F type
Reference Level ------------20Vp-p (CRT Green Cathode)
Test Input Signal -----------400Hz 30% modulation
<LCD PANEL>
<VIDEO>
<AUDIO>
All items are measured across 8
Ω
load at speaker output terminal with L.P.F.
Note:
Nominal specifications represent the design specifications. All units should be able to approximate
these. Some will exceed and some may drop slightly below these specifications. Limit specifications
represent the absolute worst condition that still might be considered acceptable. In no case should
a unit fail to meet limit specifications.
Description Condition Unit Nominal Limit
1. Intermediate Freq. Picture
Sound
MHz
MHz 45.75
41.25 -
-
2. Color Killer Sens. CH-2
CH-10
CH-55
dBµV
dBµV
dBµV 15
15
15 20
20
20
3. AFT Pull In Range
(10mV input)
- MHz ±2.1 ±0.7
Description Condition Unit Nominal Limit
1. Number of Pixels Horizontal
Vertical
pixels
pixels 640 x 3
480
-
-
2. Brightness
cd/m
2 500 -
3. Response Time - msec 16 -
4. Support Color - - 26mil.(6bit) -
5. Viewing Angle Horizontal
Vertical
°
°
-80 to 80
-65 to 70 -
Description Condition Unit Nominal Limit
1. Over Scan Horizontal
Vertical
%
% 7
7 -
-
2. Color Temperature -
x
y
°K 9200
0.286
0.294
-
±0.3
±0.3
3. Resolution Horizontal
Vertical
line
line 400
350 -
-
Description Condition Unit Nominal Limit
1. Audio Output Power 10% THD: Lch/Rch W 1.0/1.0 0.8/0.8
2. Audio Distortion 500mW: Lch/Rch % 1.0/1.0 4.0/4.0
3. Audio Freq. Response -3dB: Lch
-3dB: Rch
Hz
Hz 50 to 12K
50 to 12K -
-