FUNAI F20LCTE, Service Manual

Page: 12 / 57

4-1 L0305DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts and the CBA in order to gain access to
item(s) to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
2. Disassembly Method
(1): Order of steps in Procedure. When reassembling,
follow the steps in reverse order.These numbers
are also used as the Identification (location) No. of
parts in Figures.
(2): Parts to be removed or installed.
(3): Fig. No. showing Procedure of Part Location.
(4): Identification of part to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
S=Screw, P=Spring, L=Locking Tab, CN=Connec-
tor, *=Unhook, Unlock, Release, Unplug, or Desol-
der
2(S-2) = two screws (S-2)
(5): Refer to the following Reference Notes in the
Table.
ID/
LOC.
No.
PART
REMOVAL
Fig.
No.
REMOVE/
*UNHOOK/UNLOCK/
RELEASE/UNPLUG/
DESOLDER
Note
[1] Rear Cabinet D1 11(S-1), (S-2), ---
[2] Jack Holder D2 2(S-3), (S-4) ---
[3] Main CBA
D2
D3
10(S-5), 3(W-1),
*CN101B, *CN102B,
*CN103B, *CN51,
*CN53, *CN80,
*CN81, *CN481,
*CN801, *CN802
---
[4] Inverter CBA
D2
D3
6(S-6), *CN430,
*CN440, *CN450,
*CN460, *CN470,
*CN480
---
[5]
LCD Main
CBA Unit
D2
D3
4(S-7), *CN310A,
*CN311A, *CN312A
---
[6] LCD Holder D2 9(S-8), 6(S-9) ---
[7]
Liquid Crystal
Panel
D2 --------------- ---
[3] Main CBA
[5] LCD Main
CBA Unit
[13] Speaker R
[11] LED B CBA
[10] LED A CBA
[4] Inverter CBA
[1] Rear Cabinet
[8] Function CBA
[9] IR Sensor
CBA
[12] Speaker L
[2] Jack Holder
[7] Liquid
Crystal Panel
[14] Front
Cabinet
[6] LCD Holder
[8] Function CBA D2 3(S-10) ---
[9]
IR Sensor
CBA
D2 2(S-11) ---
[10] LED A CBA D2 2(S-12) ---
[11] LED B CBA D2 2(S-13) ---
[12] Speaker L D2 8(S-14) ---
[13] Speaker R D2 8(S-15) ---
[14] Front Cabinet D2 --------------- ---
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
ID/
LOC.
No.
PART
REMOVAL
Fig.
No.
REMOVE/
*UNHOOK/UNLOCK/
RELEASE/UNPLUG/
DESOLDER
Note