14
EN
OTR (One Touch Recording)
This function enables you to set the duration of a recording
simply by pressing
REC/OTR
.
1)
Follow steps
1)
to
3)
in “Viewing and Recording the Same
Programme”.
2)
Press
REC/OTR
repeatedly until the desired recording
length appears in the upper left corner of the TV screen.
Recording stops when 0:00 is reached.
• To check time remaining during an OTR
Press
DISPLAY
.
• To change the recording length during an OTR
Press
REC/OTR
repeatedly until the desired length appears.
• To stop an OTR before recording is finished
Press
STOP
.
• To cancel the OTR but continue recording
Press
REC/OTR
repeatedly until “
I
” appears without the
recording length.
• If there is no timer recording set after an OTR, this unit
switches to DVD mode and
indicator flashes because
the VCR is still on standby for timer recordings. Press
T-SET
on the remote control or
STOP/EJECT
on the front
panel to cancel timer standby, then press
VCR
to use the
VCR again.
If there is a timer recording set after an OTR, this unit
switches to DVD mode and
indicator lights up,
indicating that this unit is on timer standby. Press
T-SET
on the remote control or
STOP/EJECT
on the front
panel to cancel timer standby, then press
VCR
to use the
VCR again.
Auto Repeat Playback
The DVD/VCR has an auto repeat function that allows you to
repeat a tape indefinitely without touching
PLAY
.
• Use the remote control for this procedure.
• Insert a pre-recorded tape.
1)
Press
VCR
, then
MENU
.
2)
Press
K
or
L
to select “SET UP”, then press
B
.
3)
Press
K
or
L
to select “AUTO REPEAT”.
4)
Press
B
so that “ON” appears next to “AUTO REPEAT”
on the TV screen.
When in Stop mode, Auto Repeat mode will start
automatically.
If the on-screen menu still remains, press
MENU
to exit,
then press
PLAY
.
Note:
Once you select the Auto Repeat mode, it stays in effect
even after you turn off the DVD/VCR.
To Stop Playback
Press
STOP
.
To Exit the Auto Repeat Mode
Repeat steps
1)
to
3)
. Then, press
B
.
“OFF” will appear next to “AUTO REPEAT” on the TV
screen. Press
MENU
to exit.
Picture Select
This function enables you to select the picture quality of a
tape.
• Use the remote control for this procedure.
1)
Press
VCR
, then
MENU
.
2)
Press
K
or
L
to select “SET UP”, then press
B
.
3)
Press
K
or
L
to select “PICTURE”.
4)
Press
B
until the desired mode (NORMAL, SOFT, or
SHARP) is indicated on the TV screen.
5)
Press
MENU
to exit.
Note:
Once you select the Picture Select mode, it stays in
effect even after you turn off the DVD/VCR.
Automatic Operations
Automatic Rewind, Eject
When the end of a tape is reached during recording, playback,
or fast-forward, the tape will automatically rewind to the
beginning. After that, the DVD/VCR will eject the tape.
• The tape will not auto-rewind during timer recording or
One Touch Recording.
Tape Eject
A tape can be ejected with the DVD/VCR power on or off
(but the DVD/VCR must be plugged in).
• If a timer recording is set, press
STOP/EJECT
twice to eject
a tape.
I
I
[0:30]
I
[1:00]...
I
[7:30]
I
[8:00]
(Normal (OTR:
recording) 30 minutes)
MENU
TIMER
SET UP
INITIAL
SET UP
AUTO REPEAT
[ON]
PICTURE
[NORMAL]
AUTO RETURN
[ON]
MENU
TIMER
SET UP
INITIAL
MENU
TIMER
SET UP
INITIAL
MENU
TIMER
SET UP
INITIAL
SET UP
AUTO REPEAT
[ON]
PICTURE
[NORMAL]
AUTO RETURN
[ON]
FUN_H9701BD(EN).fm Page 14 Tuesday, July 27, 2004 5:57 PM
