PRE
CA
U
TI
O
N
S
– 4 –
EN
Symbols Used in This Manual
The following symbols appear in some headings in this manual.
: Description refers to video cassette tapes.
Description refers to DVD-VIDEO.
: Description refers to audio CD.
Note to CATV system installer:
• This reminder is provided to call the CATV system installer’s attention to
Article 820-40 of the NEC that provides guidelines for proper grounding
and, in particular, specifies that the cable ground should be connected
to the grounding system of the building, as close to the point of cable
entry as practical.
Maintenance
Servicing
g
• Please refer to relevant topics on the “Troubleshooting Guide”
on page 23 before returning the product.
• If this Unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts inside.
Turn off, unplug the power plug and please call our toll free
customer support line found on the cover of this manual to
locate an authorized service center.
Cleaning the Cabinet
g
• Wipe the front panel and other exterior surfaces of the Unit with
a soft cloth.
• Never use a solvent, thinner, benzene or alcohol to clean
the Unit. Do not spray insecticide liquid near the Unit. Such
chemicals may discolor the surface or damage the Unit.
Cleaning Discs
g
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe
the disc from the center to the outside of the disc. Do not wipe
in a circular motion.
• Do not use solvents such as benzene, thinner, commercially
available cleaners, detergent, abrasive cleaning agents or antistatic
spray intended for analog records.
Cleaning the Disc Lens
g
• If this Unit continues to perform improperly even after you
have referred to the relevant manual sections and to the
“Troubleshooting Guide” in this manual, the laser optical pickup
Unit may be dirty. Consult your dealer or an authorized service
center for inspection and cleaning of the laser optical pickup
Unit.
Disc Handlingg
• When you handle a disc, hold it by its edge and try not to touch
the surface of the disc.
• Always store the disc in its protective case when not in use.
Auto Head Cleaning
g
• Automatically cleans video heads as you insert or remove a
cassette tape, so you can see a clear picture.
• Playback picture may become blurred or interrupted while the
TV program reception is clear. Dirt accumulated on the video
heads after a long period of use or the usage of rental or worn
cassette tapes can cause this problem. If a streaky or snowy
picture appears during playback, the video heads in your Unit
may need to be cleaned.
1. Please visit your local audio/video store and purchase a good
quality VHS video head cleaner.
2. If a Video head cleaning tape does not solve the problem, please
call our toll free customer support line found on the cover of this
manual to locate an authorized service center.
Note(s):
• Remember to read the instructions along with the video head cleaning
tape before use.
• Clean video heads only when problems occur.
FUNAI is a registered trademark of Funai Electric Co., Ltd.
and may not be used in any way without the express written
consent of Funai.
© 2013 Funai Electric Co., Ltd.
All rights reserved.
No part of this Owner’s Manual may be reproduced, transmitted,
disseminated or transcribed, in any form or for any purpose without
the express prior written consent of Funai. Furthermore, any
unauthorized commercial distribution of this manual or any revision
hereto is strictly prohibited.
Information in this document is subject to change without
notice. Funai reserves the right to change the content herein
without the obligation to notify any person or organization of
such changes.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
