Press
[PRG]
. Use
[+]
and
[–]
to select a value between
‘Pr02’
and
‘Pr12’
.
In the Programme mode, you can enable a strobe effect. Press
[STROBE]
and use
[+]
and
[–]
to
select a value between
‘FS00’
(slow) and
‘FS99’
(fast). Press again
[STROBE]
to turn the strobe
effect off.
For the programmes, you can adjust the running speed. Press
[SPEED]
and use
[+]
and
[–]
to
select a value between
‘SP01’
(slow) and
‘SPFL’
(fast).
Press
[SOUND]
. This activates a sound controlled automatic show.
Use
[+]
and
[–]
to adjust the sensitivity of the sound control in a range from
‘SV00’
to
‘SV31’
.
Press
[Dimming]
to adjust the brightness level of the primary colours. Press
[R]
(red),
[G]
(green),
[B]
(blue) or
[W]
(white) and use
[+]
and
[–]
to select a value between 0 and 255.
Press
[Dimming]
to adjust the brightness level of the primary colours. Press
[R]
(red),
[G]
(green),
[B]
(blue) or
[1]
(UV) and use
[+]
and
[–]
to select a value between 0 and 255.
Programme mode
Sound control
Dimming (SePar Quad RGBW IR)
Dimming
(SePar Quad RGB UV IR)
Operating
SePar QUAD LED RGB UV IR, SePar QUAD LED RGBW IR
27
LED PAR
