Fun Generation SePar QUAD LED RGB UV IR Page 11 User Manual Download | Manualshive

Page: 11 / 52

background image

DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts

inside. Do not use the device if covers, protectors or optical components are missing or damaged.

DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a protective contact plug. Do not modify the mains cable

or the plug. Failure to do so could result in electric shock/death or fire. If in doubt, seek advice from a registered electrician.

WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.

WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights.

NOTICE!
Risk of fire
Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked flames.

Safety instructions

SePar QUAD LED RGB UV IR, SePar QUAD LED RGBW IR

11

LED PAR

«
...
9
10
11
12
13
...
»

Summary of Contents for SePar QUAD LED RGB UV IR





















































Reviews:

No comments

Related manuals for SePar QUAD LED RGB UV IR

Brand: ICS Schneider Messtechnik Pages: 124

Brand: Laica Pages: 4

MicroVersaTrip Plus

Brand: GE Pages: 20

Brand: GE Pages: 252

Brand: Balanced Body Pages: 12

Brand: Eagle Pro Pages: 6

Brand: GE Pages: 10

Brand: York Fitness Pages: 34

Brand: Ecco Pages: 9

Brand: Talet Equipment Pages: 17

Brand: IBEX Pages: 10

Brand: M-system Pages: 12

Brand: PacBio Pages: 13

Brand: Pablo Pages: 4

Brand: PA Pages: 28

STOMAMED COL-160

Brand: Orliman Pages: 12

Brand: StarDental Pages: 2

Brand: USC Pages: 29

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands