Fumex ME 100 EX, Manual

Page: 11 / 20

11 Manual
FUMEX ME EX
TROUBLESHOOTING GUIDE
Symptom Possible cause Recommended action
1. Difficulty moving the extraction
arm into the desired position.
Friction joints incorrectly adjusted. Adjust the tension.
Friction joints worn. Contact your dealer to replace the friction rings.
7 Troubleshooting
7.1 Troubleshooting guide
The troubleshooting guide contains information for
identifying faults which are simple to rectify. Always
perform the troubleshooting procedures before
contacting FUMEX.
8 Maintenance
Please remember that only original spare
parts may be used.
Make sure that all moving parts are secured to prevent
unintentional movement.
8.1 Cleaning
Consider the risk of electrostatic discharge
from your person or cleaning tool when
removing dust deposits.
Cleaning must be performed when the atmosphere is
not potentially explosive. When dust with an MIE of less
than 30 mJ is being extracted, personnel should wear
electrostatic dissipative shoes and clothing.
To avoid damage, the product should be cleaned with a
clean cloth dampened with a neutral detergent.
8.1.1 Dry cleaning
Vacuum and dry the product inside and outside.
MAINTENANCE SCHEDULE
Interval Item Inspection module Maintenance instructions Date
As
necessary
1.1
Extraction arm
Clean externally. Refer to Section 8.1 Cleaning .
1.2
Adjust the friction joints to achieve the desired tension.
Every three
months
4.1
Earthing
Visually inspect the earth cable for damage.
Replace as necessary.
Every six
months
5.1
Earthing
Check the earth resistance with an ohmmeter as per
step 4 of Section 5.1 Start-up . Replace as necessary.
5.2
Extraction arm
Check that the extraction arm fittings and connection
are as they should be. Rectify if necessary.
8.1.2 Wet cleaning
Check that the detergent is neutral and will
not affect any of the materials from which
the product is made. See the material
specification in Section
10.1 Technical data .
Allow the equipment to dry before use.
8.2 Maintenance schedule
Depending on the changing operating
conditions between the different systems,
the intervals for recommended maintenance
may differ. Users should therefore determine
their own maintenance intervals.
The checklist for maintenance is designed for normal
use of the product. The recommended intervals are
approximate and refer to the time after the first start-up.
FUMEX recommends the following maintenance
schedule: