This data is internal to Brunswick.
Once adjusted, allow the bike to properly fit into the cradle, load the bike wheels directly into the cradles and ensure they will not roll
back and forth. Bring down the J-hook till it fits securely over the middle part of the frame on the bike. Remember to use the strap
on the cradles to secure the wheels. Make sure all wheels have a strap securing them.
Tilt Down Feature
For access to the rear of vehicle, remove
5/8
” pin and allow the rack to tilt downward. Securely grasp the bike rack while the pin is
out, do not place bikes on the wheel cradle when operating the tilting down feature.
FIG 9
Storage Feature
Spin L Pin at 90 degree and then pull out from the center hole. Fold the main vertical arm to horizontal position (down on the opposite side of
folding shank) and re-secure using L pin. Or fold the horizontal arms upward.
FIG 10