PAIRING BLUETOOTH DEVICES
1. Turn the unit on. Press SOURCE to switch to Bluetooth mode, the LED will indicate
“ BT
”.
2. Long press “Play/Pause” key on unit for 3-5 seconds. Then you will hear a “DU”
sound and the LED icon“ ” will flash. This means the speaker unit is in pairing
mode.
3. Turn on Bluetooth in your mobile device and ensure it is in “searching device” mode.
Find
Toronto1.0
and select it.
4. Once the unit is found, enter password 0000 to connect (some devices may not
need password).
5. The LED icon “
” will light up and you will hear a “DU” sound if the pairing was
successful.
6. If the mobile device cannot find the speaker or can’t pair, please power on again
and repeat above steps.
7. The speaker will automatically reconnect to the previously paired device when
entering Bluetooth mode. If the unit cannot automatically connect to the previously
paired device - please restart the Bluetooth connectivity in your mobile device and
follow above steps to finish the connection.
8. If the devices are far away from each other (over 10 meters) the connection
between speaker and mobile device will be lost and the unit will go back to
Bluetooth standby mode.
Ensure the Bluetooth in your mobile device is in “searching device” mode. Keep on
pressing “Play/Pause” (pairing) key on the top panel, and then follow above steps to
reconnect it.
