TRACKMASTER
Ch. 6
Operating Instructions
317-160-284 Rev 6
TMX428 Owner’s Manual
41
February 2021
Control Panel Button Descriptions:
Start button
: The green start button is used to begin a workout session. When a new user steps onto the
machine and the startup information is displayed on the screen, pressing the start button will immediately
begin a 3 second countdown of the belt start at minimum belt speed. When a user has previously selected
a pre-programmed workout, pressing the start button will start the first phase of the program.
Stop buttons
: The red hexagon shaped stop buttons are used to end an exercise session. Anytime that it is
pressed during a workout session, the running belt will gently come to a stop and be locked into place for
2 minutes or until a new workout session is started. Upon pressing the stop button, the incline of the
running deck will decrease to 0 percent and the cumulative user data information will displayed for 60
seconds. To start a new workout session, press the Start button or Program button.
Enter button
: The yellow enter button is used to enter the user’s weight, age, and gender when prompted
by the display screen at the beginning of a workout session as well as entering data when creating or
modifying workout programs.
Cool Down button:
The blue cool down button will incrementally slow the running belt speed down by
0.1 MPH or KPH and decrease elevation by .5% elevation incrementally over 90 seconds every until the
running belt stops and elevation returns to 0% elevation.
Program / Select button:
The black program button calls up a list of pre-programmed workouts and is
used to select segments of a workout when creating or modifying a workout routine.
Speed
Minus “
Slower
”
: The triangular speed minus button decreases the speed of the running belt by 0.1
MPH or KPH each time it is pressed while the belt is moving. Pressing and holding the speed minus
“
slower
”
button while the belt is moving will decrease the speed of the running belt at an accelerated rate
until it is released.
Speed
Plus “
Faster
”
: The triangular speed faster button increases the speed of the running belt by 0.1
MPH or KPH each time it is pressed while the belt is moving. Pressing and holding the speed plus
“
faster
”
button while the belt is moving will increase the speed of the running belt at an accelerated rate
until it is released.
Quick Speed:
The (5) quick speed buttons will rapidly bring the running belt speed to the speed selected
from 1.0 to 5.0 MPH or 1.0 to 5.0 KPH.
Incline Minus
: The triangular incline minus button decreases the incline of the walking surface by 0.5
percent each time it is pressed while the running belt is operating. Pressing and holding the incline minus
button while the running belt is in motion will increase the rate of the command. However, it may take a
few seconds to reach the desired incline that is displayed on the information screen after the button is
released.
Incline Plus
: The triangular incline plus button increases the incline of the walking surface by .5 percent
each time it is pressed while the running belt is operating. Pressing and holding the incline plus button
while the running belt is in motion will increase the rate of the command. However, it may take a few
seconds to reach the desired incline that is displayed on the information screen after the button is released.
Quick Incline:
The (5) quick incline buttons will rapidly bring the running belt surface to the selected
incline from 3% to 15%.
Summary of Contents for TRACK MASTER TMX428
