5. INDICATORS AND BUTTONS
6. SIGNALS
26
7. CONNECTING TO THE CONTROLLERS
The
inbox
has three connection methods with Full Gauge converters (USB, Ethernet and Wi-Fi) and one method for direct connection to Full Gauge
sitard
controllers that have serial communication (RS-485).
1
- If the
inbox
is connected to a network with Internet available, the clock will be adjusted automatically according to the time zone specified in the
Sitrad
product’s settings. Otherwise, please follow the steps described in items 9 and 9.3;
2
- Check the temperature of the environment where the
inbox
is installed. Remove any sources of heat near the equipment.
RS-485
Ethernet
USB
Wi-Fi
Power LED
Power Button
RS-485 network transmission indication LED
RS-485 network reception indication LED
Status LED
USB
Ethernet
Communication network with RS-485 instruments
Power supply
Reset Button
Audio output (Not available)
HDMI Output
Occurrence
POWER LED / State
STATUS LED / State
TX / RX
Flashing
Green / Flashing
Yellow / Flashing
Blue / Flashing
Red / Flashing
Green / On
Green / On
inbox
off
and controllers
Communication between
inbox
Red / On
Green / On
inbox
booting
inbox
with clock error (1)
inbox
running normally
inbox
overheating (2)
