Caption:
[no,,]
= no
[auto]
= automatic
[,F34]
[,F35]
[,F36]
[,f37]
[,f38]
[,F39]
[,F40]
[,F41]
[,F42]
[,F43]
[,F44]
[,F45]
[,F46]
[,F47]
[,F48]
[,F49]
[,F50]
[,F51]
[,F52]
[,F53]
[,F54]
[,F55]
[,F56]
Description
Fun
Min
Max
Unit
CELSIUS
FAHRENHEIT
Min
Max
Unit Standard
Standard
Minimum delay to switch on stage 4 output again
Alarm inhibition time upon power up
Time to reactivate the alarm when manually inhibited
Alarm on time
Alarm off time
Alarm inhibition time (delay)
Digital filter operating mode
Digital filter intensity applied to the sensor
Functions lock
Time for functions lock
Control Functions Shutdown
Enable the soak function feature in output Out1
Temperature in the soak point (SSP1)
Permanence time in the soak point
Temperature in the soak point2 (SSP2)
Permanence time in the soak point2
Temperature in the soak point3 (SSP3)
Permanence time in the soak point3
Temperature in the soak point4 (SSP4)
Permanence time in the soak point4
Temperature in the soak point5 (SSP5)
Permanence time in the soak point5
RS-485 network address
PT-100
Min
Max
Unit
CELSIUS
FAHRENHEIT
Min
Max
Unit Standard
Standard
0
0
Auto
0
0
0(NO)
0
0
0
15
0(NO)
0
-50
0
-50
0
-50
0
-50
0
-50
0
1
NTC
999
999
999
999
999
999
1
20
2
60
2
1
200
999
200
999
200
999
200
999
200
999
247
0
0
Auto
1
1
0(NO)
0
0
0
15
0(NO)
0
23
0
23
0
23
0
23
0
23
0
1
sec.
Min.
Min.
sec.
sec.
Min.
-
sec.
-
sec.
-
-
°C
Min.
°C
Min.
°C
Min.
°C
Min.
°C
Min.
-
sec.
Min.
Min.
sec.
sec.
Min.
-
sec.
-
sec.
-
-
°F
Min.
°F
Min.
°F
Min.
°F
Min.
°F
Min.
-
sec.
Min.
Min.
sec.
sec.
Min.
-
sec.
-
sec.
-
-
°C
Min.
°C
Min.
°C
Min.
°C
Min.
°C
Min.
-
sec.
Min.
Min.
sec.
sec.
Min.
-
sec.
-
sec.
-
-
°F
Min.
°F
Min.
°F
Min.
°F
Min.
°F
Min.
-
999
999
999
999
999
999
1
20
2
60
2
1
392
999
392
999
392
999
392
999
392
999
247
0
0
Auto
0
0
0(NO)
0
0
0
15
0(NO)
0
-58
0
-58
0
-58
0
-58
0
-58
0
1
0
0
Auto
1
1
0(NO)
0
0
0
15
0(NO)
0
73
0
73
0
73
0
73
0
73
0
1
0
0
Auto
0
0
0(NO)
0
0
0
15
0(NO)
0
-99
0
-99
0
-99
0
-99
0
-99
0
1
999
999
999
999
999
999
1
20
2
60
2
1
300
999
300
999
300
999
300
999
300
999
247
0
0
Auto
1
1
0(NO)
0
0
0
15
0(NO)
0
23
0
23
0
23
0
23
0
23
0
1
0
0
Auto
0
0
0(NO)
0
0
0
15
0(NO)
0
-146
0
-146
0
-146
0
-146
0
-146
0
1
999
999
999
999
999
999
1
20
2
60
2
1
572
999
572
999
572
999
572
999
572
999
247
0
0
Auto
1
1
0(NO)
0
0
0
15
0(NO)
0
73
0
73
0
73
0
73
0
73
0
1
6.5.1 Description of parameters
F01 - Access code (123):
Required when you want to change configuration parameters. This code is not required for viewing the
parameters.
F02 - Indication offset:
Allows for the compensation of possible deviations in the temperature reading caused by the
replacement of the sensor or changes in the cable length.
F03 - Stage 1 operating mode:
[,,,0]
- Refrigeration
[,,,1]
- Heating
F04 - Minimum setpoint allowed to the end user (1st stage):
Electronic backstop aimed to prevent an exceedingly low temperature being inadvertently adjusted in
the setpoint.
F05 - Maximum setpoint allowed to the end user (1st stage):
Electronic backstop aimed to prevent an exceedingly high temperature being inadvertently adjusted in
the setpoint.
F06 - Stage 1 control differential (hysteresis):
It is the temperature difference (hysteresis) between switching output OUT1 ON and OFF.
F07 - Minimum delay to switch on stage 1 output again:
It is the minimum time the OUT1 output will remain off, i.e. the length of time between the last stop and
the next start up.
F08 - Stage 2 operating mode:
[,,,0]
- Refrigeration (controlled by SP2)
[,,,1]
- Heating (controlled by SP2)
[,,,2]
- Refrigeration (controlled by SP1)
[,,,3]
- Heating (controlled by SP1)
F09 - Minimum setpoint allowed to the end user (2nd stage):
F10 - Maximum setpoint allowed to the end user (2nd stage):
Electronic backstop to prevent exceedingly low or high temperatures being inadvertently adjusted in the
setpoint.
F11 - Stage 2 control differential (hysteresis):
It is the temperature difference (hysteresis) between switching output OUT2 ON and OFF.
F12 - Minimum delay to switch on stage 2 output again:
It is the minimum time the OUT2 output will remain off, i.e. the length of time between the last stop and
the next start up.
F13 - Stage 3 operating mode:
[,,,0]
- Refrigeration (controlled by SP3)
[,,,1]
- Heating (controlled by SP3)
[,,,2]
- Cyclical Timer
[,,,3]
- Minimum ventilation
[,,,4]
- Refrigeration (controlled by SP1)
[,,,5]
- Heating (controlled by SP1)
NOTE:
The operation of the minimum ventilation is described on item 6.3.9.
F14 - Minimum setpoint allowed to the end user (3rd stage):
F15 - Maximum setpoint allowed to the end user (3rd stage):
Electronic backstop aimed to prevent exceedingly low or high temperatures being inadvertently
adjusted in the setpoint.
F16 - Stage 3 control differential (hysteresis):
It is the temperature difference (hysteresis) between switching output OUT3 ON and OFF.
F17 - Minimum delay to switch on stage 3 output again:
It is the minimum time the OUT3 output will remain off, i.e. the length of time between the last stop and
the next start up. Programmed only if F13=0, 1, 4, or 5.
F18 - Stage 3 cyclical timer time base:
[,,,0]
- Seconds
[,,,1]
- Minutes
F19 - Time to activate stage 3 cyclical timer:
Whenever the temperature reaches the value configured in
[,Sp1]
, the time configured in this
function is observed before activating the cyclical timer. To activate the timer at the moment
[,Sp1]
is
reached, configure this function with 0. Only if F22=1.
F20 - Time of cyclical timer of stage 3 on (
[COn,]
):
Time for which the cyclical timer will remain active.
F21 - Time of cyclical timer of stage 3 off (
[COff]
):
Time for which the cyclical timer will remain inactive.
F22 - Cyclical timer operating mode:
[,,,0]
- Independent cyclical timer
[,,,1]
- Cyclical timer triggered by the stage 1 setpoint (SP1)
[,,,2]
- Stage 1 linked to the cyclical timer (timer on upon power up)
[,,,3]
- Stage 1 linked to the cyclical timer (timer off upon power up)
[,,,4]
- Cyclical timer output on whenever stage 1 output is on
[,,,5]
- Cyclical timer output cycling whenever stage 1 output is on
F23 - Audible alarm (buzzer) operating mode:
[,,,0]
- In-range alarm (F24 and F25)
[,,,1]
- Out-range alarm (F24 and F25)
[,,,2]
- Out-of-range alarm related to the stage 1 setpoint (
[SP1,]
-F24 and
[SP1,]
+F25), the
absolute values of F24 and F25 are considered.
F24 - Buzzer operating point (lower threshold):
It is the lower temperature value for the buzzer alarm to activate according to F23.
F25 - Buzzer operating point (upper threshold):
It is the higher temperature value for the buzzer alarm to activate according to F23.
F26 - Buzzer on time:
It is the time the buzzer will remain on (active cycle). To disable the audible alarm (buzzer), configure this
function with 0.
F27 - Buzzer off time:
It is the time the buzzer will remain off (inactive cycle). To disable the audible alarm (buzzer), configure
this function with 0.
F28 - Alarm inhibition time upon power up:
It is the time for which the buzzer will remain off, even in alarm conditions, for a certain period after
initialization, since the system has not yet reached the working temperature.
F29 - Time to reactivate the buzzer when manually inhibited:
This function allows for three different configurations:
[Auto]
- The buzzer will be inhibited until the temperature reaches the normal working condition and
returns to the alarm condition again.
[,,,0]
- Buzzer cannot be inhibited by the easy access keys.
[,,,1]
to
[,999]
- Buzzer will be inhibited during this period (in minutes), switching on again if the
alarm condition persists.
F30 - Stage 4 operating mode:
[,,,0]
- Refrigeration (controlled by SP4)
[,,,1]
- Heating (controlled by SP4)
[,,,2]
- In-range alarm (F31 and F32)
[,,,3]
- Out-range alarm (F31 and F32)
[,,,4]
- Out-of-range alarm related ([
,SP1]
-F31 and
[,SP1]
+F32), the absolute values of F31
and F32 are considered.
[,,,5]
- Refrigeration (controlled by SP1)
[,,,6]
- Heating (controlled by SP1)
