13
MAINTENANCE
• Keep the ventilation vents of the concrete grinder clean at all times.
• After each use, blow low pressure compressed air through the concrete grinder housing
to ensure it is free from all dust particles which may build up. Build up of dust particles
may cause the grinder to overheat and fail.
• If the enclosure of the concrete grinder requires cleaning, do not use solvents but a
moist soft cloth only. Never let any liquid get inside the tool; never immerse any part of
the grinder into a liquid.
Carbon Brushes
When the carbon brushes wear out, the concrete grinder will
spark and/or stop. Discontinue use as soon as this happens. They
should be replaced prior to recommencing use of the grinder.
Carbon brushes are a wearing component of the concrete grinder
therefore not covered under warranty. Continuing to use the tool
when carbon brushes need to be replaced may cause permanent damage to the grinder.
Carbon brushes will wear out after many uses but when the carbon brushes need to be
replaced, take the concrete grinder to an electrician or a power tool repairer for a quick
and low cost replacement. Always replace both carbon brushes at the same time.
Note: Ozito Industries will not be responsible for any damage or injuries caused by
the repair of the concrete grinder by an unauthorised person or by mishandling of the
grinder
Spare Parts
Limited spare parts including the diamond grinding disc (15) are available subject to
availability. Please contact your local Bunnings Special Orders Desk to order the required
spare parts.
WARNING!
Ensure the concrete grinder is switched off and disconnected
from the power supply before performing any maintenance or cleaning.
