13
KNOW YOUR PRODUCT
SETUP (cont.)
Charging program notes:
•
When connecting the charger to the mains power outlet, all the LEDs will flash
briefly.
•
If the voltage of the battery is below 3V, it cannot be charged.
•
Press the Battery select button (4) to select the battery types or winter mode.
The corresponding LED (11,12, or 13) illuminates.
•
The maximum charging current strength can be set by pressing the Ampere
select button (5). The LED corresponding to the charging current strength
(14,15, or 16) illuminates.
•
The battery is charged in an automatic process consisting of not more than 6
charge settings, depending on the available battery voltage.
•
The actual charging current depends on the charge setting the charger is
currently in, and may be less than the set max. charging current.
Overload cut-out
The battery charger is equipped with electronic protection against overload, short
circuit and swapped poles. A short circuit on the terminals or swapped poles (+/-
terminals at the battery poles the wrong way round) and the LCD screen (2) will
show “
ERR
”.
