background image

16

CARING FOR THE ENVIRONMENT

Power tools that are no longer usable should not be  

disposed of with household waste but in an environmentally  

friendly way. Please recycle where facilities exist. Check with  

your local council authority for recycling advice.

Recycling packaging reduces the need for landfill and raw  

materials. Reuse of recycled material decreases pollution in the 

environment. Please recycle packaging where facilities exist.  

Check with your local council authority for recycling advice.

TROUBLE SHOOTING

Symptom

Possible Cause

Suggested Solution

The compressor does 

not start

No power supply

Check the power supply, the 

power cord and the battery 

connections

Outside temperature is too 

low

Never operate with an 

outside temperature of 

below 5¼

Battery Is flat

Turn the vehicle on and 

charge the battery

Motor is overheated

Allow the motor to cool 

down. If necessary, remedy 

the cause of the overheating

The compressor starts but 

there is no pressure

The seals are damaged

Check the seals and have 

any damaged seals replaced 

by a service centre

The compressor starts, 

pressure is shown on the 

pressure gauge, but no 

pressure to the air tool

Loose hose connections

Check the compressed air 

hose and tools and replace 

if necessary

Leak in a quick-lock coupling Check the quick-lock 

coupling and replace if 

necessary

Summary of Contents for FBAC-12160



















Reviews: