A
Mounting the LED driver
Page
3
of
8
FHSAC1-230-45CE
INSTALLATION INSTRUCTIONS
®
STEP 1: Remove the Screw
STEP 2: Remove the cover
STEP 3: Remove the Screws and
strain covers
Lift
STEP 4:
Mounting the LEDdriver
SCREW: φ=4mm
B
Making the wire connections
0.75-1mm
²
copper wire only
and
wire
rated
for
300V
,
90
°
C
minimum
.
9-10mm
NOTE:1.
Copper
wire
only
STEP 1:Wiring according to actual needs.
Press the cord wires into the strain relief slots.
Test switch
2 core wire
4 core wire
STEP 2:
Put on the strain covers.
Fulham extends a limited warranty to the original purchaser or first user for a period of 5 years from the date of manufacture when properly installed
and operated under normal conditions of use. For complete terms and conditions, please refer to the Warranty Center at www.fulham.
Specifications subject to change without notice.
com.
2017-718-3 Rev A
0-10VDC
Pulse
DIM
02
EL-T
SCREW: φ=3mm
