Installation Instructions
CAUTION: Before installing, make certain the AC power is off and the FHSCP-UNV
converter connector is disconnected.
2. MOUNTING THE EMERGENCY LED DRIVER (FHSCP-UNV)
Mount FHSCP-UNV to the top of the
luminaire with suitable fasteners (not
provided).
Drill or punch a 7/8 ” hole (1/2 ” knockout) on
top of luminaire for flexible conduit.
Attach flexible conduit to luminaire.
Refer to Figure 1 at right.
3. WIRING THE FHSCP-UNV
Perform all wiring with exception of the Violet and Brown
wires. Note: wiring must be performed in accordance with the
National Electric Code and applicable local codes. Consult
Customer Service for
additional wiring diagrams.
Refer to Figure 2 at right.
NiCd
4. INSTALLING
THE LED COMBO TEST SWITCH (LCTS)
Recessed Troffer Luminaire – Select a convenient location with
proper clearance in the LED Driver cover and drill or punch a 7/8”
hole (1/2” knockout). Insert the 7/8” bushing into the hole. Push
the plastic tube through the bushing.
Route the leads of the LCTS through the plastic tube.
Connect the wires from the FHSCP-UNV to the LCTS
(Violet to Violet, Brown to Brown).
Refer to Figure 3 at right.
Strip Luminaire – Select a convenient location on the fixture
where the LCTS will be visible after installation.
Allow for proper clearance inside the fixture and drill or punch a ½”
hole. Push the LCTS housing into the ½” hole and secure with nut.
Connect the wires from the FHSCP-UNV to the LCTS (Violet to
Violet, Brown to Brown).
Refer to Figure 4 at right.
FIGURE 1
EMERGENCY DRIVER (FHSCP-UNV)
LUMINAIRE
*
7/8" HOLE WITH
CONDUIT CONNECTOR
*
*
INSTALL FHSCP-UNV MOUNTING FASTENERS (2 PLACES)
FIGURE 2
(FHSCP-UNV)
LCTS
DIFFUSER
LUMINAIRE HOUSING
LED DRIVER COVER
7/8" BUSHING
PLASTIC TUBE
FHSCP-UNV
FIGURE 3
FIGURE 4
FHSCP-UNV
LUMINAIRE HOUSING
LCTS
2020 REV D2
Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 5 years from the date of manufacture when properly installed
and operated under normal conditions of use. For complete terms and conditions, please reference the Fulham Product Catalog (www.fulham.com).
Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the
equipment described. © Fulham Company Limited, All Rights Reserved.
Page 3 of 8
