FULGOR OV45-10, User Instructions

Page: 6 / 36

FOR ADDITIONAL INFORMATION about the treatment, recovery and recycling of this product, contact
the local of
m ce of competence, the domestic waste collection service or the store where the product was
purchased.
BEFORE SCRAPPING, make it unusable by cutting the electrical cord.
Introduction to the oven
Dear Customer, your new oven is controlled by an electronic board that constantly monitors its
operation to improve its performance.
The touch controls are state-of-the-art, precise and reliable.
The interface is elegant, orderly and discrete, more intuitive than ever!
A few buttons, many functions and no combination or sequence is dif
m cult to enter, so you can
concentrate on following the recipe and the oven is ready in two clicks!
Installation and hook-up
Dear Customer, this oven is a sophisticated electronic appliance, classi m ed as a durable good. Its
installation requires quali m ed professionals for both the hook-up of the power line and itsplacement in
the kitchen counter.
(SEE ASSEMBLY INSTRUCTIONS ON PAGE 62)
Before hook-up
When the oven is connected to the electric mains for the m rst time, the display will ask you to select your
language;use the buttons to select the language you want;
use the button to con m rm the choice;
(from now on, the language choice will remain m xed even when their are power outages).
Now, it goes into demonstration mode.
Demonstration mode
This is the mode that the oven is normally in every time that there is a power failure and, consequently,
when it is
m rst hooked-up
the purpose is to show how you can control it with a recorded sequence of commands.
6