Fulgor Milano FOBQ 1000 G MBK, Instructions For Installation And Use Manual

Page: 41 / 44

EN
39
PROBLEM
POSSIBLE CAUSE
SOLUTION
The barbecue doesn’t light No gas Check that the shut-off valve is open (ON)
Gas cylinder empty - refill or change the cylinder
The ignition system is not
working
Check the battery - you should hear a clicking
sound when you press the knob
Replace the battery
Light the barbecue manually
Gas tap regulated too high Clean and delicately dry the electrode making sure
that its position is correct
Excessive smoke from the
cooking surface
Gas valve set too high Lower the gas or turn off some of the burners
Odour of gas
DON NOT TRY TO LIGHT THE
APPLIANCE
Gas leak Close the gas with the shut-off valves
Check for leaks, tighten the fittings
If the problem persists, call the Service Centre
13 - Troubleshooting