- 25 -
Instruction Manual – ATS / BTS Moisture Analyzers
Before connecting the analyzer to a PC or printer configure the interface ports by following the steps below.
1.
Press the Menu key and use the navigation keys to select option 5 (Configuration).
2.
Use the navigation keys to select option 3 (Interface)
3.
Select the desired port and configure the port parameters. Port 1 – RS232, Port 2 – USB
Data Sending Modes:
NORMAL
Button plus Stability
Stable weighing result is transferred from the scale after pressing the
key,
NO STB
Button Only
Weighing result is transferred from the scale after pressing the
key (no
stability required)
AUTOSTB
Automatic
Weighing result is automatically transferred from the scale after it stabilizes (no
push key required)
CONTIN.
Continuously
Weighing results is continuously transferred from the scale at all times. (no push
key and no stability required)
Chapter 16: RS232 (Port 1) and USB (Port 2) Interface Ports
