Fukuda Denshi DS-7001, Service Manual

Page: 54 / 151

W ARNI NG
l
l If the channel ID is changed without notifying, it may result in
monitoring a different patient. Make sure the correct channel ID is
set for the patient.
l
l
Some wireless combinations of telemetry transmitters may generate
interference with other devices.
Before selecting the channel, verify it will not interfere with other
channels.
Make sure the telemetry manager of your system is aware of any
changes to the telemetry channels.
l
If transmitters are used in a neighboring medical facility, your facility
and neighboring facility must make agreements on the setting of
telemetry channels to prevent telemetry interference.
Telemetry Transmission ON/OFF
ON/OFF of telemetry transmission to the central monitor can be selected.
1 Select
è è è
enter password
è
.
The soft switch menu will be displayed. Select ON/OFF for “Telemeter”.
If
OFF
is selected, telemetry transmission will not be
performed. The channel ID on the home display will be
displayed as
.
To perform telemetry transmission, select ON .
※
Default Setting: ON
3 － 8