Project Fujitsu x150f Display Unit print original
Writer Marita Näsman-Repo
Date
March 2, 1998
6.
Place the AC adapter in the holder and close the stand cover,
see illustration below.
7.
Turn on the display unit using the power switch (
1
) and check
to make sure that the power LED (
2
) is on, as shown below. If
not, repeat steps 3 to 5 or refer to the
Troubleshooting
section
of this guide.
8.
Turn on the power to the computer. The picture will appear
within about 15 seconds. Adjust the picture to obtain optimum
picture quality. See the
Adjusting the picture
section in this
guide for more information.
English
8
ENTER MENU
1
2
