Ref.
Function
-
Definitions
1
Selecting the DHW operating mode
(Domestic hot water)
Marche
Arrêt
-If the installation is fitted with a DHW tank.
-On : Production of DHW according to the time program.
-Off : No domestic hot water heating, anti-frost function is active.
-Manual start button : Hold down the DHW key for 3 seconds (Switch from
"reduced" to "nominal" until the next time the DHW timer switches over).
2
Digital display
-Operating control, readout of the current temperature, of the heating mode
and of any faults
.
-View the settings.
3
Exit "ESC"
-Quit the menu.
4
Navigation and setting
-Selecting the menu.
-Setting parameters.
-Adjusting the ambient temperature setpoint.
5
Selecting the heating mode
-
Heating operating according to the heating programme
(Summer/winter mode switchover is automatic).
-
Constant comfort temperature.
-
Constant reduced temperature.
-
Stand-by mode with anti-frost protection
(Provided that the heat pump's electrical power supply is not interrupted).
6
Information display
).
-
Reading error codes.
-
Information concerning maintenance, special mode.
7
Confirm "OK"
-Input into the selected menu.
-Confirmation of the parameter settings.
-Confirmation of the adjustment to the comfort temperature setting.
8
Selecting cooling mode
Auto
-
Cooling operating according to the heating programme
(Summer/winter mode switchover is automatic).
9
Reset
(hold down the key for 3 sec)
-Reinitialising the parameters and cancelling error messages.
-Do not use during normal operation.
10
Digital display
-Operating control, readout of the current temperature, of the heating mode
and of any faults
.
11
Control knob
-Adjusting the ambient temperature setpoint.
12
Presence key
-Comfort / Reduced switchover.
On
Off
Operation manual "1408 - EN"
- 5 -
Control Box
