Fujitsu V1010 - LifeBook - Core 2 Duo 1.6 GHz Page 23 User Manual Download

Page: 23 / 162

- Locating the Controls and Connectors

USB 2.0 Ports

The USB 2.0 ports allow you to connect Universal Serial Bus devices. USB 2.0 transfers data at up to
480Mbps and is backward-compatible with USB 1.1 devices, which transfer data at up to 12Mbps. See
“Universal Serial Bus Ports” on page 72.

LAN (RJ-45) Jack

The internal LAN (RJ-45) jack is used for an internal 10Base-T/100Base-Tx Ethernet LAN connection.
See “Internal LAN (RJ-45) Jack” on page 72.

Anti-theft Lock Slot

The anti-theft lock slot allows you to attach an optional physical lock down device.

Summary of Contents for V1010 - LifeBook - Core 2 Duo 1.6 GHz



































































































































































Search results

Summary of Contents for V1010 - LifeBook - Core 2 Duo 1.6 GHz

Reviews:

Related manuals for V1010 - LifeBook - Core 2 Duo 1.6 GHz

Brands by name

Popular brands

Fujitsu V1010 - LifeBook - Core 2 Duo 1.6 GHz, User Manual

Search results

Summary of Contents for V1010 - LifeBook - Core 2 Duo 1.6 GHz

Reviews:

Related manuals for V1010 - LifeBook - Core 2 Duo 1.6 GHz

Brands by name

Popular brands