19
3.
BASIC OPERA
TION
Turn on power
Initial setting
Clock setting
Group information store
Test operation
• Press
to move among the errors.
• Press
BACK
to cancel the error display and return to the initial setting menu.
• When an error occurs, the number of units with errors will appear in
.
• Use
to check the address duplication errors and system setting errors for refrigerant
system address and / or indoor unit address for related indoor unit.
(3) Indoor unit storing
The following are the three methods for storing the remote control group with the central remote
controller. Select any one of them. However, the these storing menus will not be displayed
unless the system information scanning has been completed.
• Automatic storing
This automatically stores the remote control group with the central remote controller. Storing of all
remote control groups connected by communication cable is performed automatically in ascend-
ing order of the refrigerant system addresses and indoor unit addresses.
• Manual storing 1
A remote control group can be optionally stored to a central control number. Here, the refrigerant
system addresses and indoor unit addresses are specified and stored one at a time to selected
central control numbers.
• Manual storing 2
The remote control group is stored in sequence of the standard remote controllers as they are
operated. Sending the refrigerant system address and indoor unit address of the remote control
group actually operated to the central remote controller performs the storing.
Note
After group information store has been performed, system information store is performed. All the
currently saved group information store data is deleted.
Se_Ch3_p11-29.p65
01.5.22, 4:04 PM
19
