14
3.
BASIC OPERA
TION
Turn on power
Initial setting
Clock setting
Group information store
Test operation
Note
• When in initial setting mode,
will light up.
• Unless “(2) System information scanning” or “(3) Indoor unit storing” have been completed, initial setting
mode will not end even if SW42 is pressed.
Always wait one minute or more after performing the operations for turning on the power shown in “3-
2-1. Turn on power” before performing the initial settings. If initial settings are performed after the
power is turned on and before the outdoor and indoor unit system data has been created, an error will
occur.
Setting of central remote
controller address
System information
scanning
Automatic storing
Manual storing 1
Manual storing 2
Version display
XXXX.XX
