Fujitsu U9310X Operating Manual Download

Page: 60 / 99

Working with the notebook

Switching on the notebook via the port replicator

►

Press the ON/OFF button on the port replicator to switch the notebook on.

You can con

gure the function of the ON/OFF switch under Windows (see

"Programming

the ON/OFF button", Page 22

). The settings apply both to the ON/OFF switch of

the notebook and to the ON/OFF switch of the Port Replicator.

Switching off the notebook via the Port Replicator

►

Close all applications and shut down your operating system (please refer
to the manual for the operating system).

If the notebook cannot be shut down properly, press the ON/OFF switch on the notebook
for about four seconds. The notebook will switch itself off. Any data not saved may be lost.

Disconnecting the notebook from the Port Replicator

►

Disconnect the supplied USB cable (USB Type-C) from the USB 3.2 Gen
2 port (USB Type-C) of the notebook.

Fujitsu

Summary of Contents for U9310X




































































































Search results

Summary of Contents for U9310X

Reviews:

Related manuals for U9310X

Brands by name

Popular brands

Fujitsu U9310X, Operating Manual

Search results

Summary of Contents for U9310X

Reviews:

Related manuals for U9310X

Brands by name

Popular brands