vii
Caution
The handheld device is precision equipment containing a liquid
crystal display (LCD).
Do not apply strong force, shock, or drop the device. Doing so
may damage or destroy the LCD.
When not planning to use the device for a long time, disconnect
the charger. Disconnect the charger from the outlet and the
device. Failure to do so may cause an electrical shock or fire.
Completely charge the battery before disconnecting it from the
outlet.
Use only the charger specified in the manual.
Do not disassemble or alter the charger. Doing so may cause a
device failure, fire, or injury.
Do not cover or wrap the device and charger with a cloth when in
use. Doing so raises the internal temperature and may result in a
fire.
•
Battery pack (Lithium-ion battery pack)
Use only the designated charger to charge the battery pack.
Do not connect the positive and negative terminals of the battery pack to anything
metallic (e.g., a chain necklace).
Do not heat the battery pack or dispose of it by throwing it into a fire.
Do not leave the battery pack in a hot place (e.g., in a car on a sunny day or outside
on a scorching day).
Do not moisten or wet the battery pack with any fluid.
Do not apply any strong force, shock, or drop the battery pack.
Do not disassemble or alter the battery pack.
If any liquid leaks from the battery pack, clean the case. Then mount a new battery
pack.
A fully charged battery pack looses power and deteriorates when stored for a long
time. Charge the battery to about 50% capacity when storing for a long time.
The LED of the battery pack on the front of the device flashes red when the battery
pack needs to be charged. When the LED starts flashing, immediately turn the
power off. Then replace the battery pack with a fully charged battery.
Alternatively, charge the weak battery. See Section 1.3.2 “Battery charging.”
Summary of Contents for TeamPad PBT7500-16
Page 19: ...6 ...
