Error Message Resolution Guide
Message
Reason
Solution
Reference Tech Note
Error receiving host\nlist
from Server;
Bad Protocol detected.
Usually a result of bad cabling, power or faulty
transceiver. Also, will receive this if the Mobile
Unit is in the wrong mode for Server
operation.
---
Unexpected Server\ndata
received;
Bad Protocol detected.
Usually a result of bad cabling, power or faulty
transceiver. Also, will receive this if the Mobile
Unit is in the wrong mode for Server
operation.
---
Error starting\nhost
application;
Connected to the server but can not
connect to the distant end.
Configure the server handler to access the
host application.
---
Select Host or App;
Need to choose your Host/application
destination.
User selection required.
---
Connecting...;
Attempting to connect to the
Host/application.
Advisory message.
---
TCP Error\nReading IP
Address\nREBOOT MOBILE
UNIT;
Mobile Unit missing Network IP information. Configure the Mobile Unit with the correct
network IP information.
---
Printer start error;
Could not initialize the printer.
Cable or power issue with the printer.
---
Battery too low\nto print;
Not enough power to print.
Replace the battery with a fully recharged
battery.
---
Paper Feed Error\nFix Then
Hit Enter;
Paper in the printer is not ready.
Replace the paper or rethread the paper in the
printer.
---
Printer Error\nPrint Ended;
Can not print.
Check cable, battery, communication settings
and paper in the printer.
---
Supported Equipment Manual
•
May, 2006
4-5
