2-18
2.10 Cleaning
(1) Main Unit Cover
Wipe the cover with a cloth dampened with alcohol (ethyl alcohol), a cloth dampened with an aqueous
solution of neutral detergent and wrung tightly, or a dry cloth.
If you use a cloth dampened with an aqueous solution of neutral detergent, be sure to wring it tightly;
otherwise, the solution may enter the unit, causing problems.
Do not use volatile matter such as thinner and benzene, which may cause discoloration or fading.
Display
Wipe the display with a cloth dampened with alcohol (ethyl alcohol), a cloth dampened with
water and wrung tightly, or a fine cloth that could be used to clean eyeglasses.
Printer (When built in)
- Cleaning before role paper replacement
Before opening the role paper cover, brush off foreign matter, such as dust and sand.
If dust or sand enters the gears in the printer, a printing failure or operational failure may occur.
- Periodic cleaning of printer
Power off the handy terminal.
(1) Platen (To be cleaned once a week)
Open the role paper cover.
Brush off foreign matter, such as dust and sand, from the gears with a soft nylon brush.
Brush off
foreign matter
here.
Summary of Contents for TeamPad 500
